Jabsco

Jabsco Impeller Kit - 6 Blade - Urethane - 2" Diameter

Impeller Kit

Material:Urethane
Drive Type:Single Flat Drive
Number of Blades:6
Dimensions:

  • Diameter:2"
  • Shaft Width:7/8"
  • Shaft Diameter:5/16"

Insert Material:Plastic


Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.
Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.

Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.

Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such.

Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.

WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Product Info


Impeller Kit

Material:Urethane
Drive Type:Single Flat Drive
Number of Blades:6
Dimensions:

  • Diameter:2"
  • Shaft Width:7/8"
  • Shaft Diameter:5/16"

Insert Material:Plastic


Jabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.
Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.

Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.

Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such.

Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.

WarningWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Shipping Policy


All of our orders ship out within 48 hours of payment being received. We use UPS Ground, FedEx, and USPS for most of our shipments. Buyer will receive invoice first which will show the item tracking number and carrier website where buyers can review package status.

Please refer to the listing details or message us if you have any specific questions regarding shipment.
We only ship to the confirmed address, Please verify your address is correct before you pay for the item.
  • Your order is usually shipped 48 hours after payment has been received. We do not ship on weekends and holidays.
  • Unbox Shopping Network is not responsible for service transit time. Transit times are provided by the carrier, exclude weekends and holidays, and may vary with package origin and destination, particularly during peak periods.
  • International buyers are responsible for duties and customs fees.
  • Tracking numbers will be sent to all customers upon package shipment
  • We do not ship to P.O. Boxes, Military APO's or FPO addresses.
  • We do not offer local pickup.
  • We do not offer combine shipping.
  • We are not responsible for any incorrect or undeliverable addresses.
Return Policy

We offer a No-hassle 30 days replacement/refund after receiving your parcel. The merchandise must be returned in its original condition to us. The amount refunded will be the purchase price plus any additional shipping fees you paid (if any).

  • Any returning must inform us as soon as possible
  • We might ask the buyer to test the item in order to eliminate improper use factor, the buyer has a responsibility to follow the test correctly.
  • We will cover all expense (item price, shipping) if confirmed due to manufacturing problem or our errors, the other way round, the buyer will responsible for the return and ship to postage.
  • The item must be returned in NEW condition and with the entire original package and accessories, manuals, etc or it will be rejected by our warehouse and returned back to you.
  • Replacement / Refund will be made within 3-5 business days after the goods are returned and received by our warehouse.&;lt
  • We strongly recommend you to use a service with tracking# to locate the return packages.
  • Items return after the required deadline we might ask for a 10-40% restocking fee.
  • Returned products are permitted and must be initiated by the buyer within 30 days from the date of purchase.
  • There is no restocking fee for damaged or defective products. Shipping and handling fees are absolutely non-refundable.
  • All non-defective, undamaged products are subject to a 20% restocking fee if returned opened or in a non-factory sealed box.
  • Please, always contact us first, before starting a return via email for assistance at customerservice@unboxshoppingnetwork

Subscribe

x